• bg

Our Products

Accessories for Roughness Tester#sensors for roughness tester

Short Description:

Accessories for Roughness tester#sensors for roughness tester   Kairda testers#portable roughness tester KR220 & KR210#split type roughness tester KR310 & KR320.of them, the principle for these testers are inductance, with different sensors height stands, it can meet all your needs for roughness measurements. ﹡ Small hole sensor KS100 the Standard Sensor for KR220 KR210 ﹡ Axe type sensor KS160 the Standard Sensor for KR310 and KR320  also can using groove sensor KS130 instead ...


Product Detail

Product Tags

Accessories for Roughness tester#sensors for roughness tester

 

Kairda testers#portable roughness tester KR220 & KR210#split type roughness tester KR310 & KR320.of them, the principle for these testers are inductance, with different sensors height stands, it can meet all your needs for roughness measurements.

﹡ Small hole sensor KS100
the Standard Sensor for KR220 KR210

Standard sensor for roughness tester KR220

﹡ Axe type sensor KS160
the Standard Sensor for KR310 and KR320 
also can using groove sensor KS130 instead

Standard sensor for roughness tester kr310

Related Products, Roughness Testers

Below photo is to show the roughness Testers
with standard sensor for measuring flat surface.

kairda roughness tester.01

Accessories for Roughness Tester, Sensors and its parts

KS55 – Extending Rod

Extending the length of sensor (extending 50mm) , can add 3 pieces in maximum.

KS90 – Right Angle Rod

change the direction of sensor to make it move in transverse , mostly for surface of particular groove such as crankshaft etc.

KS100 – Small Hole Sensor

for most of the plane, inclined plane, cone work piece, and measures in holes of a diameter >5mm and a depth<15mm.

KS110 – Curved Surface Sensor

for convex or concave surfaces with a curvature radius of 3 mm or more.

KS120 -very small hole Sensor

in holes of a diameter >2mm and a depth<9mm.

KS130 – Groove sensor

measuring in grooves with a width greater than 3 mm and a depth less than 3.2mm, the distance from the stylus tip to the front edge is 3mm.

KS160 – Axe type Sensor

measuring in grooves with a width greater than 3 mm and a depth less than 3.2mm, the distance from the stylus tip to the front edge is 1.6mm. Measuring for flat surface when used for split type roughness tester.

KS131 – Deep Groove Sensor

in grooves with a width greater than 3 mm and a depth less than 10 mm. and measures steps less than 10mm in height.

KS131P – Narrow Stylus Curved Surface Sensor

in grooves with a width > 1.5 mm and a depth< 7 mm. and measures steps less than 10mm in height.

KS132- 15mm Groove & Curved Surface Sensor

in grooves with a width > 3mm and a depth <15mm.

The drawings for the sensors

Sensors dimension1

Sensors dimension2.2


  • Previous:
  • Next:

  • Write your message here and send it to us

    HOT-SALE PRODUCT

    Quality First, Safety Guaranteed