• bg

High precise roughness tester KR310, the new design Split surface roughness tester is high-precision,  with touch screen, windows style, smart phone operation, suitable for various application environments for surface roughness measuring.

1. Detachable drive unit Suitable for measuring in confined space

2. with mobile App installed, the mobile phone remote measure the work piece

3. support Bluetooth printing.

4. Can measure 22 parameters, real-time display parameters and waveform.

5. 4 profile filter: RC, PC-RC, Gauss, D-P

6. Complies with standards: ISO4287, ansi B46.1, DIN4768, JIS B601

7. Can output data to PC by software installed in it.

8. Standard sensor groove sensor measures flat surface and also measures grooves in some situation.

High precise roughness tester KR310 the best sell Portable Surface Roughness Tester are measuring roughness and used in laboratory,  aviation field, workshop and so on. the roughness tester have many optional sensor, to be equipped with the height gauge or magnetic base can realize more measurement in wide range position.  

Image

Description

 1 (1)

KS55 - Extending Rod, extending rod increases the depth for pickup to enter the part.  extending 50mm long.

 1 (2)

KS90 - Right Angle Rod, change the position of the sensor, mostly use for measure surface of particular groove.

 1 (3)

KS100 - Small Hole Sensor, measures flat surface, shaft ; when measure inner hole surface, the diameter of inner hole are required>5mm, depth>22mm.

 1 (4)

KS110 - Curved Surface Sensor, to measure smooth cylindrical surface which radius is larger than 3mm, for the large radius smooth spherical surface and other surface also can obtain good approximation, need to work with platform KA520 or KA620.

 1 (5)

KS120 - pinhole Sensor, to measure the inner surfaces of holes with radius more than 2mm, better to work with platform KA520 or KA620.

 1 (6)

KS130 - Groove sensor, measure flat surface, or groove surface with width ≥2mm, depth ≤3mm, or step down ≤3mm deep, also to equipped with Measuring fixture, can measure cylindrical surface.

1 (7) 

KS131 - Deep Groove Sensor, measure groove with width wider than 3mm and depth deeper than 10mm, or the surface roughness of beneath steps with depth less than 10mm, also can used to measure the planar, cylindrical used with platform,better to work with platform KA520 or KA620.

 1 (8)

KA520 -Metal Substrate Working platform, adjustable height 200mm.

With flexible and stable operation and wider application range. Roughness of complex shapes can also be measured. Measurement stand enable the adjustment of the position of stylus to be more precise and measurement to be more stable. If Ra value of measured surface is relatively low, Using measurement platform is recommended.

1 (9) 

KA620 -Marble Substrate Working Platform, adjustable height 300mm.

With flexible and stable operation and wider application range. Roughness of complex shapes can also be measured. Measurement stand enable the adjustment of the position of stylus to be more precise and measurement to be more stable. If Ra value of measured surface is relatively low, Using measurement platform is recommended.

 1 (10)

Height Gauge Adaptor, adjust testing height and angle.The best Measuring Fixture for split type surface roughness tester, allows more flexible and firm measurement, Adjustable max height: 300mm. 

1 (11) 

Standard Roughness Calibration Block  Multi-engraved lines (Square Wave)

Made by optical glass, with high hardness, high accuracy standard roughness value, anti-scratch, has longer life than metal roughness block.

Meet standard GB/T19067.1-2003 and ISO5436-1:2000

Approximation: Ra=0.1um, 0.2um, 0.4um,  0.8um, 1.6um, 3.2um, 6.4um

Customized Value and Sine Wave available, welcome to inquire.

1 (12) 

Standard Roughness Calibration Block  Single engraved lines

Made by optical glass, with high hardness, high accuracy standard roughness value, anti-scratch, has longer life than metal roughness block.

Meet standard GB/T19067.1-2003 and ISO5436-1:2000

Approximation: H10-20μm   (roughness tester use filter D-P, test RT value)

Customized Value available, welcome to inquire.

 1 (13)

Roughness Comparator  (30 pcs/set)

This set contains standards of the six most important machining methods in the prevalent "AA" values. These surface roughness is used to compare and determine the degree of the surface finish by comparision method and eye estimation or magnifying glass.The surface rough contast blocks is made of 45 super carbor steel except the GCr15 which is using to plat lapping the sample block. All 30 speciments are calibrated in u''AA (Arithmetical Average) and in the metric equivalents um Ra.

1-(14) 

Charge and Cable for Surface Roughness Tester

Charger: US and EU standard optional

Cable: USB interface

 1 (16)

Mini thermal printer

External printer, connect by USB interface, suitable for Kairda models.

1 (17) 

Thermal printing paper

Suitable for mini thermal printer and Kaidas’s tester with built-in printer

Packing: 10pcs/bag

 


Post time: Jun-12-2020