• bg

Our Products

Shore Durometer Hardness Tester Shore A Sore D Shore C

Short Description:

Shore Durometer Hardness Tester is to measure rubbers in low hardness and high hardness, foams and so on.  Shore hardness tester commonly has A-type, D type, C type three kinds of patterns. This Durometer needle tip pressure are: A type and C type Z0.55N-8.06N D type 0-44.5N The unit is mall,Net weight around 0.5kg. standard package include the main unit and packing box. A-type is the Rubber hardness tester, which are widly used to test common rubber, complex, soft rubber,elastomers, lea...


Product Detail

Product Tags

Shore Durometer Hardness Tester is to measure rubbers in low hardness and high hardness, foams and so on.  Shore hardness tester commonly has A-type, D type, C type three kinds of patterns.

This Durometer needle tip pressure are: A type and C type Z0.55N-8.06N D type 0-44.5N

The unit is mall,Net weight around 0.5kg. standard package include the main unit and packing box.

A-type is the Rubber hardness tester, which are widly used to test common rubber, complex, soft rubber,elastomers, leather, wax and so on.

D-type is the Durometer to test hard rubber, hard colophony, grass, plastic,print board, fibre and so on.

C-type Shore Hardness tester is applied compression rate of 50%, the stress 0.049Mpa above, this Durometer are used in testing of various foam, such as the plastic foam in the shoe with micro hardness testing, sponge, microporous material and so on.

Feature
1. Small size, easy to carry and easy to operate, High resolution
2. Direct dial reading
3. Manual testing process without electrical control
4. It is widely used for quality control in the production site with strong adaptability to the working environment
5. optional testing stand improves stability and make measurement more accurate
6. The precision conforms to JB6148 GB2411

Shore A

Test range: 0-100 HA

Available test range: 10-90 HA

Dimension: 115*60*25(mm)

Stroke: 2.5 mm

Tip dimension: Φ0.79mm

Shore D

Test range: 0-100 HDAvailable test range: 10-90 HD Dimension: 115*60*25(mm)Stroke: 2.5 mm

Tip dimension: SR0.1mm;

Net weight: 0.5Kgs;

Shore C

Test range: 0-100 HW

Available test range: 10-90 HW

Dimension: 115*60*25(mm)

Stroke: 2.5 mm

Tip dimension: SR2.5mm

Net weight: 0.5Kgs

Probe Photo

Flat Probe for Shore A hardness tester

Suitable for low and medium hardness materials such as common rubber, soft rubber, etc.

Round probe for Shore C hardness tester

Suitable for low-hardness material such foams, sponge etc.

Pointed probe for Shore D hardness tester

Suitable for high hardness materials, such as hard ruber, hard plastic, fibre, etc


  • Previous:
  • Next:

  • Write your message here and send it to us